Single-origin from the forests of Australia.
Temperature-controlled, hive to the UAE.
Every batch numbered. Every number verifiable.

TA, UMF™, NPA, MGO: Honey Activity Ratings Explained

EQUIVALENCY IN CURRENT HONEY LABELLING AND GRADING SYSTEMS

TA, UMF™, NPA, MGO: Honey Activity Ratings Explained

A science-backed guide to understanding the different measurement systems on medicinal honey – what they measure, how they compare, and what the numbers on the jar actually mean.

The Confusion on Honey Labels

If you have ever compared jars of medicinal honey, you will have noticed a bewildering array of numbers and acronyms: TA 35+, UMF™ 20+, MGO 829, NPA 15+. They appear on different honeys, from different countries, measured in different ways. Without context, it is nearly impossible to know what these numbers mean – or how they compare to each other.

This confusion is not accidental. The honey industry uses several distinct measurement systems, and they are often presented to consumers as though they are interchangeable grading scales. They are not. Each one measures something different.

This guide explains exactly what each system measures, how they relate to one another, and how to read the label on a jar of medicinal honey with confidence. All information is drawn from peer-reviewed research and the industry-standard testing methodologies used in Australia and New Zealand.

The Critical Distinction: These Are Measurements, Not Grades

The most important thing to understand is this: TA, NPA, and MGO are not grading systems. They are measurements of specific markers in honey.

A grading system implies a single, standardised quality scale. What exists in medicinal honey is instead a set of laboratory measurements, each capturing a different aspect of the honey’s composition or activity. Treating them as equivalent “grades” leads to widespread misunderstanding.

Here is what each one actually measures:

Total Activity (TA)

Total Activity measures a honey’s complete antimicrobial potency – its ability to kill bacteria using all of its active compounds. This includes both hydrogen peroxide activity and any non-peroxide components.

TA is determined using the phenol equivalence assay, the current industry-adopted commercial test in Australia and New Zealand for quantifying antibacterial activity in honey. [1] In this test, a 25% honey solution is placed in wells cut into nutrient agar seeded with Staphylococcus aureus. The resulting zones of bacterial growth inhibition are compared against a series of phenol standard solutions to produce a phenol equivalence (PE) value.[2]

A TA 35+ rating means the honey inhibits bacterial growth with the same potency as a 35% phenol solution. The higher the TA number, the greater the honey’s total bacteria-fighting power.

TA is the broadest measurement available. It captures the full antimicrobial spectrum of the honey, regardless of which compounds are responsible. This makes it particularly relevant for honeys like Jarrah and Dwutta, whose antimicrobial activity is driven primarily by hydrogen peroxide.

Non-Peroxide Activity (NPA) and the Unique Manuka Factor (UMF™)

Non-Peroxide Activity (NPA) measures only the antibacterial potency that is not derived from hydrogen peroxide.

NPA is determined using the same phenol equivalence assay as TA, but with one crucial difference: the enzyme catalase is added to the honey solution before testing. Catalase breaks down hydrogen peroxide, effectively removing it from the equation. What remains is the residual, non-peroxide antibacterial activity.

This residual activity is most commonly found in honeys derived from Leptospermum species – the botanical family that includes the Manuka bush. Because of this association, NPA has also been referred to as the Unique Manuka Factor (UMF™).

UMF™ is a trademarked term restricted to New Zealand Manuka honey producers. It is certified based on three markers: MGO concentration, Leptospermum signature compounds, and dihydroxyacetone (DHA). At its core, UMF™ is a measure of NPA – it quantifies the non-peroxide component only.

This is a critical point: UMF™ does not capture hydrogen peroxide activity. It measures a subset of a honey’s total antimicrobial power, not the whole picture.

Methylglyoxal (MGO)

MGO measures the concentration of methylglyoxal present in a honey sample, expressed in milligrams per kilogram (mg/kg).

Methylglyoxal is the compound primarily responsible for the non-peroxide antibacterial activity found in Manuka honey. It is not a measurement of the honey’s ability to kill bacteria – it is a measurement of how much of one specific chemical the honey contains.

Research has established a strong positive linear correlation between MGO concentration and NPA (R² = 0.95).[5] This means higher MGO levels reliably predict higher non-peroxide activity. However, MGO and NPA are measuring different things: MGO measures a chemical’s concentration, while NPA measures the honey’s actual performance against bacteria.

Relationship between methylglyoxal and non-peroxide activity
Positive linear correlation between methylglyoxal (MGO) concentration and non-peroxide activity (NPA). R² = 0.95

How TA, NPA, UMF™, and MGO Relate to Each Other

Understanding the relationship between these measurements is essential for comparing honeys accurately.

TA = hydrogen peroxide activity + non-peroxide activity. It captures everything. For honeys like Jarrah, which derive their antimicrobial power primarily from hydrogen peroxide, the TA value reflects the honey’s full medicinal potency. For Manuka honey, TA includes both its MGO-driven non-peroxide activity and any hydrogen peroxide activity present.

NPA = non-peroxide activity only. It is the portion of TA that remains after hydrogen peroxide is removed by catalase. For Manuka honey, NPA is the dominant component. For Jarrah honey, NPA is typically negligible because its activity comes from hydrogen peroxide.

UMF™ = a trademarked label for NPA in New Zealand Manuka honey. It is not a separate measurement system – it is NPA certified under a specific trademark. UMF™ ratings apply exclusively to New Zealand Manuka honey.

MGO = the amount of methylglyoxal in the honey. It predicts NPA reliably but measures a chemical concentration, not antimicrobial performance directly.

The Approximate Equivalency Between Rating Systems

Because these measurements capture different things, they cannot be directly equated. However, the industry has established broad approximate equivalencies based on the demonstrated correlation between MGO concentration and non-peroxide activity.

The table below shows the approximate equivalencies between UMF, MGO, NPA, and TA that have broad industry acceptance.[6]

UMF™

MGO (mg/kg)

NPA

TA

Trademark restricted to NZ producers. Based on MGO, Leptospermum & DHA.

Concentration of an active non-peroxide component in honey.

Antibacterial potency that is not derived from hydrogen peroxide.

Antibacterial potency derived from hydrogen peroxide + non-peroxide components.

5+

83

5+

5+

10+

263

10+

10+

15+

514

15+

15+

20+

829

20+

20+

25+

1,202

25+

25+

30+

1,625

30+

30+

35+

2,001

33+

35+

Approximate equivalencies between honey activity measurement systems. These are broad industry-accepted equivalents, not exact conversions.
EQUIVALENCY IN CURRENT HONEY LABELLING AND GRADING SYSTEMS
Equivalency in current honey labelling and grading systems, showing the different measures and their approximate equivalents.

What This Means When You Are Choosing a Honey

With this understanding, you can read honey labels with much greater clarity.

If a jar of Manuka honey displays UMF™ 20+, this means it has been tested and certified to contain non-peroxide antibacterial activity equivalent to a 20% phenol solution. This corresponds to approximately 829 mg/kg of methylglyoxal. It does not tell you the honey’s total antimicrobial activity — only the non-peroxide portion.

If a jar of Jarrah honey displays TA 35+, this means it has been tested and shown to inhibit bacterial growth with the combined potency of all its active compounds — equivalent to a 35% phenol solution. This is the complete antimicrobial picture. Jarrah honey derives its activity primarily from hydrogen peroxide, which is a broad-spectrum antimicrobial agent effective against bacteria, fungi, and other pathogens.[7]

If a jar of Manuka honey displays MGO 829, this tells you the concentration of methylglyoxal in the sample. Based on the established correlation, this corresponds to approximately NPA/UMF™ 20+. It does not directly tell you how effectively the honey kills bacteria – it tells you how much of one antibacterial compound is present.

None of these measurements is inherently superior to the others. They are different tools measuring different things. The important thing is to understand what each one captures and what it does not.

Why TA Is the Most Comprehensive Single Measure

For consumers seeking to compare medicinal honeys from different floral sources – such as Jarrah from Western Australia and Manuka from New Zealand – Total Activity (TA) provides the most complete basis for comparison.

TA is the only measurement that captures all of a honey’s antimicrobial compounds in a single number. UMF™ and NPA deliberately exclude hydrogen peroxide activity. MGO measures a chemical concentration rather than actual antimicrobial performance. Only TA tests the honey’s real-world ability to inhibit bacteria using everything it contains.

This is particularly significant for Australian honeys like Jarrah and Dwutta, whose antimicrobial power is driven by hydrogen peroxide – a compound that UMF™ and NPA ratings are specifically designed to exclude. A Jarrah honey with TA 35+ may have negligible NPA, but this does not mean it lacks antimicrobial potency. It means its potency comes from a different active mechanism that NPA simply does not measure.

Research by the Western Australian Department of Agriculture tested 342 honey samples and found that Jarrah and Marri honeys had antimicrobial activity approximately 90% greater than the average activity of New Zealand Manuka honey when tested against Staphylococcus aureus.[8]

Frequently Asked Questions

What is the difference between TA and UMF™ on honey?

TA (Total Activity) measures a honey’s complete antimicrobial potency, including both hydrogen peroxide and non-peroxide activity. UMF™ (Unique Manuka Factor) measures only the non-peroxide antibacterial activity in New Zealand Manuka honey. TA captures everything; UMF™ captures a subset. Both are determined using the same underlying phenol equivalence assay, but TA tests the honey without any modification, while UMF™/NPA tests it after hydrogen peroxide has been removed by catalase.

What does TA 35+ mean on a jar of honey?

A TA 35+ rating means the honey’s total antimicrobial activity is equivalent to a 35% phenol solution when tested against Staphylococcus aureus. This is a very high level of antibacterial potency. The TA rating captures all of the honey’s active compounds – both hydrogen peroxide and non-peroxide components – in a single number.

What does MGO mean on Manuka honey?

MGO stands for methylglyoxal, the primary compound responsible for Manuka honey’s non-peroxide antibacterial activity. The MGO number on a jar tells you the concentration of methylglyoxal in milligrams per kilogram. For example, MGO 829 means the honey contains 829 mg/kg of methylglyoxal, which corresponds approximately to UMF™ 20+ or NPA 20+. MGO measures a chemical concentration, not the honey’s actual antibacterial performance.

Is TA the same as UMF?

No. TA and UMF™ measure different things. TA (Total Activity) captures the honey’s full antimicrobial potency from all sources. UMF™ (Unique Manuka Factor) captures only the non-peroxide antibacterial component, which in Manuka honey is primarily driven by methylglyoxal (MGO). A honey can have a high TA but low or zero UMF™ if its antibacterial power comes from hydrogen peroxide rather than MGO. This is the case for Jarrah honey from Western Australia.

How do I compare Jarrah honey to Manuka honey?

The most direct comparison is through Total Activity (TA), which measures antimicrobial potency regardless of the active mechanism. Both honeys can be tested using the same phenol equivalence assay. Research has found that Western Australian Jarrah honey averages approximately 90% greater antimicrobial activity than New Zealand Manuka honey when tested against the same bacteria. However, they work through different mechanisms: Jarrah through hydrogen peroxide and Manuka through methylglyoxal.

Why do different honeys use different rating systems?

Different rating systems exist because different honeys have different active compounds. UMF™ is a trademark developed specifically to market New Zealand Manuka honey and its unique methylglyoxal-based activity. TA is a broader measure suitable for any honey, which can be used on honey’s globally, including Australian varieties like Jarrah, Dwutta and Marri whose activity comes from hydrogen peroxide. MGO measures the concentration of one specific compound. The variety of systems reflects the genuine diversity of medicinal honeys, but it can be confusing for consumers.

What is NPA on honey?

NPA stands for Non-Peroxide Activity. It measures the antibacterial potency of a honey after hydrogen peroxide has been removed from the sample using the enzyme catalase. NPA is essentially what UMF™ measures – the terms are closely related, with UMF™ being the trademarked version used exclusively for New Zealand Manuka honey. NPA is most relevant for Leptospermum-derived honeys (Manuka) and is less meaningful for honeys like Jarrah whose activity comes from hydrogen peroxide.

Which honey rating should I look for when buying medicinal honey?

It depends on the honey type. For Manuka honey, look for UMF™ or MGO ratings – these are the most established indicators of that honey’s specific non-peroxide potency. For Australian medicinal honeys like Jarrah or Dwutta, look for the TA rating, which captures their full hydrogen peroxide-driven antimicrobial activity. In all cases, ensure the honey has been independently laboratory tested and the rating is from an accredited testing facility.

References

Australian Wildflower: TA35+ Tested. Lab-Certified. Transparently Rated.

Every jar of Australian Wildflower honey is independently tested in accredited laboratories and rated for Total Activity. No ambiguity. No marketing gimmicks. Just verified potency from the pristine forests of Western Australia.

➤  Explore the range at australianwildflower.ae

Natalie Bussau is the founder and Honey Curator of Australian Wildflower. A fifth-generation Australian, she grew up in the forests of South-West Western Australia that the brand now sources from - the same biodiversity hotspot that gives Jarrah and Dwutta their character. Her work rests on one principle: claim only what can be verified. Every batch Australian Wildflower sells is independently tested by ISO/IEC 17025-accredited laboratories, published in full, and reviewed for scientific accuracy before it reaches a label or a page. Natalie writes here on provenance, single-origin honey, and how honey's measured properties are actually established - evidence first, and nothing the data cannot support.

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment

Name

Home Shop Cart Account
Shopping Cart (0)

No products in the cart.